This fits your .
Enter your model number
to make sure this fits.
Optical Port: 100Mbps, 1310nm wavelength, Dual SC singlemode fiber, support 100M Ethernet.
RJ45 Port: 10M/100M auto negotiation; Full Duplex or Half Duplex; Supports MDI/MDI-X auto crossover
Standards and Protocols: IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Easy-to-view LED indicators provide status to monitor network activity easily External power supply
Supports wide temperature range from 0°C to 60°C
128 K's data buffer RAM
Support for low-delay time pure data transmission and full/half-duplex flow control.
Built-in -dog timer to monitor any error in internal data exchange
1 x Ethernet port (RJ45) 10/100Base-Tx
1 x Optical port (Dual SC) 100Base-Fx
1310nm Single mode
Transfer Distance: up to 20km
Connectors: Dual SC connector
Fiber core: 8.3um, 8.7um, 9um and 10um on single mode fiber
Optical Power (dBm): -15~ -3
Receiving Sensitivity (dBm): ≤-34
Standard: IEEE 802.3, IEEE 802.3u
Available speed: auto-detective 10/100Mbps Full-Duplex and Half-Duplex auto-negotiation
Connectors: RJ-45 connector; MDI/MDI-X connection auto-sensing
FX, TX, Link/Act(Left/Right), FDX, PWR
FX: Light on when fiber speed is 100Mbps, while “OFF” means the rate is 10 Mbps
TX: Light on when TP speed is 100Mbps, while “OFF” means the rate is 10 Mbps.
Link/ACT: Left side is indicate for fiber port link/act and right side for TP,light flashing when data transmitting and receiving
FDX: Light on when TP full-duplex mode is active,light off when TP half-duplex mode is active
PWR: Light on when DC power on, else light off
Output voltage: AC 220V or DC5V 1A
Power dissipation: ≤1 watts
Housing: Metal enclosure
Volume: 94x70x26mm (LxWxH)
Operating Temperature: 0°C to 50°C
Storage Temperature: -20°C to 70°C
Humidity: 5% to 90% RH
Before you installing the Converter,verify that the package contains the following:
1.The Ethernet Media Converter
2.AC/DC Power Adapter
Fast Ethernet Media Converter Up to 100Mbps RJ45 to 100M Single-Mode Dual SC Fiber 20Km - B071P398NG